The Manual Control option allows a user of WebLink to control loads from using a Web Browser. In order to have the ability to manually control a load, the user must use a user id to logon that has access to a Role that includes the Manual Override function enabled. See Roles and Users for more information on that. After choosing Manual Control, the user will be prompted to select a type of device, e.g. Group Code or Relay, then choose the device (relays require selection of the panel first, then the relay. Next, the user may choose to select a time value for the override to stay in effect. Finally, a function and state may be selected as well. Note that the elapsed time value is only useful for ON overrides.

Elapsed time value may be limited using the Setup option. See Setup. Functions such as Master, Blink, Clean, and Shed, are only applicable for Relay overrides. A Switch Code and/or Group Code override will have a function pre-programmed in WinControl that is associated with the group.

Figure 8.1. Manual Control